Elite Collective Realty
Due Diligence & Transactions · November 2026

SB 407 Water-Conserving Fixture Rules and Seller Disclosure in Los Angeles

California's water-conserving plumbing fixture law is one of the quieter items in a residential transaction. It applies to many older homes, it carries a written disclosure, and it is simple to address once you know what it asks.

By Patricia Blakemore, Broker/Owner · Elite Collective · November 16, 2026

The Short Version

Senate Bill 407, codified in Civil Code sections 1101.1 through 1101.8, requires owners of residential property built and available for use on or before January 1, 1994 to replace noncompliant plumbing fixtures. Single-family homes had a January 1, 2017 deadline. Sellers must disclose the requirement in writing and state whether noncompliant fixtures remain. Thresholds cover toilets, urinals, showerheads and interior faucets, with limited exemptions. A fixture survey before listing turns this into a routine line item.

In This Article

  1. What the Law Requires
  2. Which Fixtures Count as Noncompliant
  3. Exemptions and Edge Cases
  4. The Seller's Written Disclosure
  5. How It Plays Out in Negotiation
  6. A Practical Compliance Checklist
  7. Where This Fits in a Luxury Transaction

What the Law Requires

Senate Bill 407, enacted in 2009, added a short article to the California Civil Code requiring older residential and commercial buildings to replace plumbing fixtures that use more water than set thresholds. The operative sections are Civil Code 1101.1 through 1101.8, with the related seller disclosure in section 1102.155.

Under section 1101.2, the article applies to residential and commercial real property built and available for use on or before January 1, 1994, subject to the exemptions in section 1101.7. For single-family residential property, section 1101.4 set a deadline of January 1, 2017 for replacing noncompliant fixtures with water-conserving ones. Separate deadlines and rules apply to multifamily and commercial property, so owners of those building types should review the applicable sections directly.

The law also connects to permitting. For many building alterations or improvements to single-family property, replacement of noncompliant fixtures is a condition of final permit approval. That is one reason fixture compliance belongs in the same conversation as permit history research.

Which Fixtures Count as Noncompliant

Section 1101.3 defines a noncompliant plumbing fixture by flow rate. A fixture is noncompliant if it exceeds any of these limits:

A water-conserving fixture is defined as one that meets the current building standards applicable to new construction of the same type. That distinction matters in practice. The thresholds above identify what must be replaced, while replacement fixtures purchased today generally must meet current California standards, which are more stringent than the 1994-era limits. Confirm current requirements with your plumber and local building department before ordering fixtures.

In a luxury home, the fixtures most often flagged are older toilets in secondary baths, multi-head shower systems, and decorative faucets installed before current standards took effect.

Exemptions and Edge Cases

Section 1101.7 lists three exemptions. The article does not apply to:

The technical feasibility exemption deserves care. It requires a licensed plumber's certification, not an informal judgment, and it is tied to the property's age or plumbing configuration. Some estate homes with original drain lines or unusual fixture rough-ins may qualify for specific fixtures; most will not.

Buyers of designated historic homes should confirm whether the property is a registered historical site within the meaning of the statute rather than assuming any historic association qualifies. A short legal review is worthwhile when the exemption matters to a negotiation.

The Seller's Written Disclosure

Civil Code section 1102.155 requires a seller of covered single-family residential property to disclose in writing that section 1101.4 requires California single-family residences to be equipped with water-conserving plumbing fixtures, and whether the property includes any noncompliant fixtures. The statute frames this as the seller's own statement, not part of the contract, and not a warranty or a substitute for inspections.

In Los Angeles transactions, this disclosure is typically handled within the standard statewide disclosure forms used by brokers. The most common problems we see are practical, not legal:

An accurate answer protects the seller and sets realistic expectations for the buyer. Our pre-listing inspection guide explains how to gather this information before the first showing.

How It Plays Out in Negotiation

Noncompliant fixtures rarely change the economics of a luxury sale on their own. Replacing toilets, showerheads and faucets is usually a modest cost relative to price. Their effect shows up elsewhere: in credibility, timelines and the tone of repair requests.

When a buyer's inspector notes older fixtures that the disclosure did not mention, it invites broader questions about how carefully the seller completed every disclosure. Conversely, a seller who arrives with a fixture survey and receipts for replacements signals a well-documented property. For buyers, the item is generally best handled as a credit or a straightforward replacement request rather than a point of contention. A good inspection on a luxury property will note flow ratings where they are visible, which gives both sides a factual basis.

Timing also matters. Replacement work requested late in escrow can collide with final walkthrough schedules, particularly when specialty or imported fixtures have long lead times. Where a buyer plans a remodel soon after closing, the parties may agree that the buyer will handle replacement as part of that work, with the arrangement documented in writing. Either way, settle the approach during the inspection period rather than in the final days before closing.

A Practical Compliance Checklist

For owners of homes built on or before January 1, 1994, the following sequence addresses the requirement efficiently:

Collected in one place, these records strengthen the broader documentation binder that supports a well-run sale.

Where This Fits in a Luxury Transaction

Fixture compliance is a small item that is easy to get right and awkward to get wrong. We treat it as part of the pre-listing preparation for every eligible home and as a standard question in buyer due diligence. If you are preparing to sell, our seller services include a disclosure readiness review so that items like this are resolved before a buyer's inspector raises them.

Because the statute contains specific definitions, deadlines and exemptions, and because building standards for new fixtures continue to evolve, verify current requirements with a licensed plumber and your transaction counsel before relying on any summary, including this one.

This article is general information about California's water-conserving plumbing fixture requirements and related seller disclosure as of 2026. It is not legal, tax or financial advice. Statutory requirements, building standards for replacement fixtures and disclosure forms can change, and their application depends on the property. Consult a qualified real estate attorney and a licensed plumber about your specific situation.

Frequently Asked Questions

Which homes are covered by SB 407?

The article applies to residential and commercial property built and available for use on or before January 1, 1994, subject to listed exemptions. For single-family homes, Civil Code section 1101.4 required noncompliant fixtures to be replaced by January 1, 2017. Homes built after that 1994 date are outside the article's scope.

What makes a toilet or showerhead noncompliant?

Under Civil Code section 1101.3, a toilet is noncompliant if it uses more than 1.6 gallons per flush, a urinal more than 1.0 gallon, a showerhead more than 2.5 gallons per minute and an interior faucet more than 2.2 gallons per minute. Replacement fixtures should meet current California building standards.

Do I have to replace fixtures before I can sell?

The law set a 2017 compliance deadline for single-family owners and requires sellers to disclose in writing whether noncompliant fixtures remain. It does not by itself stop a sale from closing, but undisclosed or inaccurate answers can create disputes. Most sellers find it simpler to replace fixtures before listing.

Are historic homes exempt?

Section 1101.7 exempts registered historical sites, along with properties where installation is not technically feasible as certified by a licensed plumber, and buildings with permanently disconnected water service. Confirm that a home qualifies as a registered historical site under the statute rather than assuming any historic status applies.

How do I check a fixture's flow rating?

Toilets are often stamped with gallons per flush near the hinge or inside the tank. Showerheads and faucet aerators may be marked with gallons per minute. If a rating cannot be found, a licensed plumber can test flow or recommend replacement. Keep receipts and specifications for any new fixtures in your property file.

Preparing a pre-1994 home for sale?

We include a disclosure readiness review in every listing plan, so details like fixture compliance are settled before buyers arrive. Start with a brief conversation. Schedule a strategy call, or visit Buyers and Sellers.

Schedule a Strategy Call

Sources: California Civil Code Section 1101.4 · California Civil Code Section 1101.3 · California Civil Code Section 1101.7 · California Civil Code Section 1102.155

Patricia Blakemore · Elite Collective

Direct: (213) 319-3040

Toll Free: (844) 475-0999

Email: [email protected]

Address: Manhattan Beach, California 90266

Web: www.elitecollectiverealty.com

CalDRE# 02079554 · Patricia Blakemore, Broker/Owner · Elite Collective Realty