The Short Version
In Los Angeles luxury transactions, the most effective repair requests are grounded in written bids from licensed contractors rather than inspector estimates or guesswork. Bids define scope, price and timing, which lets both sides choose between seller repairs, a closing credit or a price adjustment. Each path carries different implications for lender rules, appraisal, permits and verification. Buyers should obtain bids within the investigation period, and sellers should evaluate them with their own contractors before responding.
In This Article
Why Bids Change the Conversation
A general home inspection identifies conditions. It rarely prices them, and when it does, the figures are broad. A request that says the roof is near the end of its life, or that the sewer lateral shows root intrusion, leaves the seller free to argue severity and cost. A request supported by a licensed roofer's written proposal, or a plumbing contractor's camera report and bid, replaces opinion with a defined scope and number.
In the luxury segment, that difference is magnified. Systems are larger and more specialized: multi-zone HVAC, pool and spa equipment, integrated lighting and automation, steel window assemblies, natural stone and complex roof geometry. Costs vary widely depending on materials and access, and an inspector's rough estimate can be off by a wide margin in either direction.
We encourage buyers to treat the general inspection as a map and specialist bids as the pricing layer. Our overview of home inspections for luxury properties explains how to sequence specialist inspections so bids can follow promptly.
Timing Within the Contract
Under the California Association of Realtors residential purchase agreement, the buyer's investigation contingency defaults to 17 days after acceptance unless the parties negotiate a different period. Repair requests are typically delivered on the C.A.R. Request for Repair form within that window, and the seller may agree, decline or counter.
That window is shorter than it sounds. Specialist inspections must be scheduled, reports delivered and contractors brought back for bids, often with a second visit for access to roofs, crawlspaces or equipment. On a large hillside or estate property, two or three trades may be involved. We advise buyers to:
- Book general and specialist inspections in the first days after acceptance.
- Ask inspectors to flag items that need a contractor evaluation, so bidding can begin before the final report arrives.
- Request written bids with a clear scope, materials, permit assumptions and validity period.
- Negotiate a longer investigation period at the offer stage if the property's complexity warrants it.
A request delivered late, without supporting bids, gives the seller little reason to engage and the buyer little time to respond to a counter.
What Makes a Bid Credible
Not every bid carries equal weight. Sellers and their agents will scrutinize the source and the scope. A credible bid generally includes:
- A licensed contractor. In California, a contractor's license is generally required for work valued at $1,000 or more in combined labor and materials, a threshold raised from $500 effective January 1, 2025. The exemption does not apply to work requiring a permit or to anyone employing workers. Verify any license through the Contractors State License Board.
- A defined scope. The bid should tie directly to findings in the inspection report, specifying what will be repaired or replaced and to what standard.
- Permit and code assumptions. Roofing, electrical panel, structural and many plumbing repairs require permits in the City of Los Angeles and most county jurisdictions. Bids should say whether permit fees and code upgrades are included.
- Comparable materials. In a luxury home, the scope should match the existing quality. A bid that prices a lesser material will undervalue the repair and invite dispute later.
Two bids for significant items are better than one. They give a range, reduce the appearance of a padded number and help both sides converge.
Repairs, Credits or a Price Adjustment
Once the cost is defined, the parties must decide how to address it. Each option has trade-offs:
- Seller repairs before closing. This preserves the price but puts control of the work with the seller. The standard purchase agreement generally requires repairs to be performed in a skillful manner, with materials of comparable quality, in compliance with applicable permits and codes, and supported by receipts and a written statement of the work. Buyers should confirm the exact language in their contract version.
- A closing credit. The buyer controls the work after closing. Lenders limit seller credits, typically to the buyer's allowable closing costs and within program-specific caps, so the credit may need to be structured carefully. Jumbo lenders set their own rules.
- A price reduction. This is often simplest for financed buyers whose credit limits are reached. It also lowers the purchase price for property tax purposes, though the buyer then funds repairs with post-closing cash.
For major items such as a roof replacement, many buyers prefer to control the contractor and materials themselves. Our article on roof certification and due diligence covers that decision in more depth.
The Seller's Side of the Table
Sellers should never respond to a bid-backed request on instinct alone. We advise sellers to take three steps:
- Verify the finding. Have your own licensed contractor review the condition. Sometimes the issue is real but narrower than described. Sometimes the buyer's scope includes upgrades rather than repairs.
- Separate repair from improvement. A failing water heater is a repair. Replacing a functioning system with a higher-efficiency model is an improvement. Clear separation keeps the negotiation credible.
- Weigh the alternative. If the buyer cancels, the next buyer will likely find the same condition, and the seller may then have a disclosure obligation regarding the report. A measured concession often costs less than a return to market.
Sellers who expect a negotiation can reduce friction by completing a pre-listing inspection and obtaining their own bids before launch, as discussed in our note on pre-listing inspections and seller leverage. Known issues priced into the list strategy tend to generate fewer surprises in escrow.
Verifying the Work Before Closing
When a seller agrees to perform repairs, verification is the buyer's protection. Request copies of invoices, the contractor's license number, permit numbers and final inspection sign-offs where permits apply. For work on systems such as roofs, sewer laterals or electrical panels, a short re-inspection by the buyer's original inspector or contractor is worthwhile.
Schedule enough time between repair completion and closing to address any shortfall. The final verification of condition is not the moment to discover that a repair was not completed or was completed to a lesser standard. Our guide to the final walkthrough outlines what to check and how to document it.
If work cannot be completed before closing, alternatives include a credit, a price adjustment or, in limited cases and only if the lender permits it, an escrow holdback. Holdbacks require clear written instructions and are not always available with jumbo financing.
Our Approach
We advise clients on both sides to treat repair negotiations as a pricing exercise grounded in evidence. For buyers, that means scheduling specialists early, obtaining licensed bids and presenting a request that is specific, proportionate and easy to evaluate. For sellers, it means verifying findings independently, distinguishing repair from upgrade and choosing the resolution that best protects the net result and the timeline.
In a market where luxury buyers are well advised and sellers are well represented, the side with the clearest documentation usually shapes the outcome. Buyers preparing for an upcoming purchase can learn more on our buyer services page.
Frequently Asked Questions
Why should a repair request include contractor bids?
Bids convert inspection findings into a defined scope, price and timeline. That removes much of the debate about severity and cost, and lets both sides evaluate repairs, credits or a price adjustment on the same factual basis. In luxury homes, where systems are specialized and costs vary widely, bids are especially valuable for credibility.
How long does a buyer have to request repairs in California?
Under the C.A.R. residential purchase agreement, the investigation contingency defaults to 17 days after acceptance, though the parties can negotiate a different period. Repair requests are usually made within that window. Because specialist inspections and bids take time, buyers should schedule them immediately after acceptance or negotiate a longer period at the offer stage.
When is a licensed contractor required for repairs in California?
A license is generally required for work valued at $1,000 or more in combined labor and materials, effective January 1, 2025, up from $500. The minor work exemption does not apply to work that needs a permit or to anyone employing workers. Licenses can be verified through the Contractors State License Board.
Is a credit better than having the seller make repairs?
It depends. A credit gives the buyer control over contractor selection and materials, which many luxury buyers prefer for major items. However, lenders cap seller credits and generally limit them to allowable closing costs. A price reduction may work better when those limits are reached. Seller repairs keep the price intact but require careful verification.
How should a seller respond to a bid-backed repair request?
Have your own licensed contractor review the condition, separate true repairs from upgrades, and weigh the request against the cost and disclosure implications of returning to market. A measured response with a clear rationale, whether agreeing, countering or offering a credit, usually keeps the transaction on track better than a blanket refusal.
Preparing for inspections and repair negotiations?
We help buyers and sellers structure repair requests and responses grounded in licensed bids and clear documentation. Schedule a private conversation to plan your approach. Schedule a strategy call, or visit Buyers and Sellers.
Schedule a Strategy CallPatricia Blakemore · Elite Collective
Direct: (213) 319-3040
Toll Free: (844) 475-0999
Email: [email protected]
Address: Manhattan Beach, California 90266
Web: www.elitecollectiverealty.com
CalDRE# 02079554 · Patricia Blakemore, Broker/Owner · Elite Collective Realty
