The Short Version
New-construction buyers tend to assume the warranty is the protection. It is one layer. California's statutory construction standards set the substantive floor, an express written fit-and-finish warranty covers a defined list of finish items for a minimum period, and any longer coverage is contractual. The difference between a production builder and a single-project spec developer is not the paperwork — it is who will still exist in year four.
In This Article
Fit and Finish Versus the Statutory Standards
Two things are commonly conflated. The first is the express warranty a builder hands you at closing. California Civil Code section 900 requires a builder to provide a homebuyer with a written limited warranty of at least one year covering fit and finish of items including cabinets, mirrors, flooring, interior and exterior walls, countertops, paint finishes and trim. If the builder provides no such warranty, a one-year period applies by default.
The second is the substantive standards in the Right to Repair Act, Civil Code sections 895 through 945.5, which apply to homes first sold new on or after January 1, 2003. These set functional standards across water intrusion, structural, soils, fire protection, plumbing, electrical and other categories, each with its own time period running from close of escrow.
So a scratched countertop is a fit-and-finish matter with a short life. A window assembly that leaks is governed by a different standard with a longer horizon. Builders sometimes offer an enhanced protection agreement in place of the statutory scheme, which must meet strict notice requirements. Read which regime your contract actually invokes.
Production Builder Versus Spec Developer
A production builder with an established Los Angeles presence has a warranty department, a claims process, a reputation to defend, and balance sheet depth. Service is uneven but the counterparty is real, and a written claim usually reaches someone whose job is to resolve it.
A one-off spec developer is a different proposition. The typical structure is a project-specific LLC that acquires the lot, carries the construction loan, sells the finished house, distributes proceeds, and winds down. The general contractor may be a separate entity, the design professionals separate again, and each carries its own insurance with its own limits and exclusions.
That does not make spec purchases unwise. Some of the best-built houses in the Los Angeles market are one-off projects by developers who care intensely about their work. It means your recourse analysis has to look past the warranty document to the parties behind it.
Ask who the general contractor is, whether the license is active and clean, and whether the same team has completed prior projects nearby. A developer with a continuing local pipeline has reputational reasons to respond. Verify the permit record matches what was built.
The LLC Dissolution Problem
Here is the practical failure mode. Year three, a persistent leak appears at a parapet detail. You write to the builder. The LLC has been dissolved, the members have distributed proceeds, and the general liability policy was written on a claims-made basis and lapsed at project completion.
Several things reduce that exposure, and all of them must be arranged before closing, because afterward you have no leverage. Ask for certificates of insurance for the developer and the general contractor, and ask specifically whether coverage is occurrence-based, which responds to incidents during the policy period even if the claim comes later, or claims-made, which does not once the policy ends. Ask whether a completed operations extension is in place.
Ask who holds subcontractor warranties on the roof, windows, waterproofing membrane, elevator and mechanical systems, and request written assignment of those manufacturer and installer warranties to you at closing. Those are often the most durable protection in the file.
Confirm no unreleased mechanics liens and no fixture filings encumber equipment you believe you are buying outright.
Walk-Through and Punch-List Discipline
Retain your own inspector on new construction. Buyers skip this because the house is new, which is precisely when systems are least proven and finishes conceal the most. A thorough independent inspection before the final walk-through pays for itself repeatedly.
Build the punch list as a written, numbered, photographed document with a completion date per item, signed by both parties. Verbal assurances at a walk-through evaporate. On larger homes, add specialist scopes: an infrared moisture scan, a pool and equipment review, a low-voltage and control system commissioning check, and a full mechanical balance test.
Confirm the certificate of occupancy status. Closing on a temporary certificate of occupancy is common on custom homes but leaves outstanding conditions attached to the property, and you should know exactly what remains and who is obligated to clear it.
Where meaningful items remain open at closing, an escrow holdback is far more effective than a promise. Money still in escrow finishes work; money already distributed does not.
What to Negotiate Before You Close
The window for all of this is between offer and close. Six items belong on the list.
Ask for the full warranty document at offer stage rather than at signing, so counsel can read what it covers and what it excludes. Ask for written assignment of all manufacturer and subcontractor warranties. Ask for the as-built drawings, the finish and equipment schedule, and the operations manuals. Ask for a defined warranty service process with a named contact and a response window. Ask for insurance certificates and the completed operations position. Ask for a holdback covering unfinished scope.
Push back on two clauses that appear frequently. Arbitration provisions with buyer-unfriendly venue or cost allocation deserve review. So do broad waivers or limitations that attempt to narrow statutory rights, which are constrained in their enforceability and should be evaluated by an attorney rather than accepted.
None of this is adversarial. A serious developer answers these questions readily, and the answers themselves tell you a great deal. Bring the checklist into your buy-side process at the start, not the week before closing.
Frequently Asked Questions
How long is a builder warranty on a new California home?
Civil Code section 900 requires a written limited warranty of at least one year covering fit and finish items such as cabinets, flooring, countertops, paint and trim, and a one-year period applies by default if none is provided. Separate statutory standards under the Right to Repair Act carry longer periods by component, running from close of escrow.
What happens if the developer's LLC has been dissolved?
Your practical recourse narrows considerably. Claims may still exist against the general contractor, subcontractors, design professionals, and their insurers, but pursuing them is slower and costlier. This is why buyers should secure insurance certificates, confirm whether coverage is occurrence-based, and obtain written assignment of subcontractor and manufacturer warranties before closing.
Do I still need a home inspection on a brand-new house?
Yes. New construction hides defects behind finishes that have never been through a full weather cycle or a full season of mechanical operation. An independent inspector, ideally supplemented by infrared moisture scanning and a mechanical commissioning check, catches items the builder's own quality control missed and gives you documented leverage before closing.
Should I close on a temporary certificate of occupancy?
It happens routinely on custom homes, but only with clarity. Obtain the written list of outstanding conditions, the expiration date, a defined obligation on the developer to clear them, and a holdback sized to the remaining work. Also confirm with your lender and insurance carrier that a temporary certificate does not affect their commitments.
Buying New Construction in Los Angeles
New construction rewards buyers who ask structural questions early. If you are considering a spec or custom home, I can help you build the diligence list before you write.
Schedule a Strategy CallPatricia Blakemore · Elite Collective
Direct: (213) 319-3040
Toll Free: (844) 475-0999
Email: [email protected]
Address: Manhattan Beach, California 90266
Web: www.elitecollectiverealty.com
CalDRE# 02079554 · Patricia Blakemore, Broker/Owner · Elite Collective
